How to Safely Scrap an Electric Motor for Its Copper
If you have harvested electric motors from old washing machines, tumble dryers, lawnmowers, or power tools, you are sitting on a solid scrap payout.
If you take these motors to a UK scrapyard as they are, the yard will buy them under the “Electric Motors” category. While this pays much better than light iron, the yard is factoring in the heavy steel casing and the labour required to extract the metal inside.
If you have some basic tools and 15 minutes to spare, you can crack the motor open yourself. By extracting the pure, dense copper windings hidden inside, you can unlock a significantly higher payout.
Here is a step-by-step guide to safely stripping an electric motor for its copper.
Tools You Will Need
Before you begin, gather these common workshop tools:
- An angle grinder (fitted with a metal-cutting disc) OR a heavy-duty cold chisel and a hammer.
- A sturdy bench vice.
- A pry bar or heavy-duty flathead screwdriver.
- Pliers or a pair of mole grips.
- Essential Safety Gear: Thick leather work gloves, safety goggles, and ear protection.
Step 1: Safety First & Inspection
Electric motors are heavy, greasy, and contain sharp components.
- Ensure the motor is completely disconnected from any power source or capacitor.
- Put on your safety goggles and heavy gloves. When cutting metal, sparks and sharp shards will fly.
- Inspect the windings visible through the casing. Warning: Some modern, cheaper appliances use aluminium wire that has been spray-painted to look like copper. Scratch the wire with a pocket knife or file. If it stays gold/pink underneath, it’s copper. If it reveals silver/white metal, it’s aluminium (which has a much lower scrap value and isn’t worth stripping).
Step 2: Remove the Outer Casing and Components
Most motors are encased in a protective aluminum or steel shell.
- Clamp the motor securely into your bench vice.
- Use a spanner or screwdriver to remove any external bolts, plastic fan blades, and pulley wheels attached to the central shaft.
- If the shell is cast aluminium, a few sharp blows with a heavy hammer will often crack it open, exposing the inner core (the stator).
Step 3: Cut the Copper Windings on One Side
Once the inner core is out, you will see the copper wire tightly wrapped in bundles through the steel teeth of the stator.
- Position the core in the vice so one of the looped ends of the copper wire bundles is facing upward.
- Using your angle grinder (or a cold chisel and hammer), cut through the copper loops on one side only.
- Make your cut as flush to the steel core as possible. You want to completely sever the loops so that the remaining wire forms straight U-shapes inside the core.
Step 4: Push and Pull the Copper Out
Now that one side of the loops is completely cut off, you can extract the copper from the opposite side.
- Flip the core around in the vice so the uncut, looped side of the copper is facing you.
- Take a punch tool, old screwdriver, or pry bar, and tap the cut ends of the wire from the other side to loosen them.
- Grab the uncut copper loops with your pliers or mole grips.
- Pull firmly. Because you severed the connection on the other side, the copper bundles should slide out of the steel slots in neat, heavy chunks.
How to Group Your Yield for the Scrapyard
Once the motor is completely stripped, sort your pile to ensure the yard doesn’t downgrade your hard work:
- The Copper Wire: Drop this into your “Heavy Copper” or “Braided Copper” bin. Even though it is insulated by a thin layer of clear enamel varnish, yards accept this as high-grade copper scrap.
- The Stator Core & Shaft: Toss the remaining heavy steel core and the central shaft into your “Heavy Structural Steel” or “Iron” pile.
- The Casing: If the outer shell was made of cast aluminium, toss it into your “Cast Aluminium” bin.
What is stripped copper worth today?
Don’t guess the value of your hard work. Copper prices change every day based on global trade markets. Before you pack your buckets into the car, check our Live UK Scrap Copper Price Charts to see exactly what yards are paying per kilo for clean copper today.
