How to Identify Different Grades of Scrap Copper
Copper is undisputed as the king of the scrapyard. It is highly sought after, infinitely recyclable, and commands the highest price per kilo of any common household metal.
However, you cannot simply throw all your copper into a single bucket and expect top dollar. UK scrapyards divide copper into specific grades based on its purity, thickness, and cleanliness. If you mix low-grade contaminated copper into a bucket of pure copper, the yard will downgrade your entire load to the lowest price tier.
Here is a practical guide to identifying the most common grades of scrap copper so you can sort your haul like a pro and maximize your payout.
1. Bare Bright Copper Wire (The Top Tier)
This is the most valuable and highest-paying grade of copper you can find. It is highly prized because it requires zero processing before it can be smelted down.
- How to identify it: It must be completely bare, uncoated, and unalloyed wire or cable. It should have a clean, shiny, reddish-orange metallic glow.
- Common sources: Stripped electrical mains cables, heavy-duty industrial wiring, and thick twin-and-earth cables.
- The Rules: It must be completely free of any plastic insulation, green corrosion (oxidation), paint, solder, or burnt ash. It must also be thicker than a pencil lead (16 gauge or thicker)—if the strands are hair-thin, it is categorized as “braided” or “shiny wire,” which fetches slightly less.
2. No. 1 Scrap Copper (Clean Copper)
This is the second-highest grade. It consists of clean copper items that are not wire.
- How to identify it: Clean copper tubing, pipes, bus bars, and clippings. The metal can show slight signs of weathering or age, but it must be structurally clean.
- Common sources: Plumbing pipes, water tubes, and clean copper sheets from roofing or boilers.
- The Rules: To qualify for No. 1 pricing, pipes must be completely clean. This means zero solder joints, no brass fittings attached, no paint, and no heavy lime-scale build-up inside. Cut away any soldered joints with a pipe cutter to save the clean lengths for this top tier.
3. No. 2 Scrap Copper (Dirty / Contaminated Copper)
This grade accommodates copper that has seen some heavy usage or contains minor impurities. It is worth less than No. 1 copper, but it is still highly valuable.
- How to identify it: Any copper pipes or sheets that are painted, heavily oxidized (turned dark green or black), or still have solder joints attached.
- Common sources: Old plumbing networks pulled directly out of walls, uncleaned copper boiler heat exchangers, and the enamelled copper wire windings pulled out of electric motors.
- The Rules: While it can have solder, paint, and corrosion, it must still be predominantly copper. It cannot contain excessive iron, plastic attachments, or internal sediment.
4. Braided / Hair Wire
- How to identify it: This consists of very thin, fine strands of stripped copper wire woven together.
- Common sources: Stranded grounding wires, extension cords, and automotive wiring harnesses.
- The Rules: Even if it is perfectly bare and shiny, yards separate hair-thin wire from Bare Bright because it burns up much faster in the furnace during recycling, leading to a slightly lower yield.
5. Insulated Copper Wire (Cables)
Instead of stripping your wire, you can sell it with the plastic coating still attached. This is graded by the percentage of actual copper recovery inside the cable.
- Heavy Duty / Clean Cable (approx. 60%–70% Copper): Thick cables like structural armored wire or heavy power feeds. The plastic coating is thin relative to the massive copper core inside.
- Standard Household Cable (approx. 20%–40% Copper): Standard twin-and-earth house wiring, appliance plugs, and extension cords.
- Low-Grade Wire (Under 20% Copper): Computer data cables, ethernet (Cat5/Cat6) cords, and telephone lines. These have very thin copper wrapped in layers of plastic, shielding, and rubber, fetching the lowest price per kilo.
Quick Sorting Checklist Before You Visit the Yard
- Get a Magnet: Run a magnet over your copper. True copper is non-magnetic. If the magnet sticks to a pipe, it is actually plated steel and belongs in the iron pile.
- Cut the Joints: Keep a pair of pipe cutters in your garage. Slicing off a 2-inch soldered joint can instantly upgrade a 3-meter copper pipe from No. 2 pricing to No. 1 pricing.
- Separate Your Buckets: Use separate, labeled buckets for Bare Bright, No. 1 Clean, No. 2 Dirty, and Insulated Wire. Weighing them separately ensures you are paid accurately for your effort.
What are today’s copper grades worth?
Because copper is a globally traded commodity, prices for No. 1, No. 2, and Bare Bright wire fluctuate by the hour. Check our Live UK Copper Scrap Price Tables right now to see the current exact market rates per kilo for every single grade.
